Linux - Kudzu detect configure new hardware, Detects and configure new hardware on linux
Kudzu detect configure new hardware
Kudzu - detect configure new hardware
kudzu - detects and configures new and/or changed hardware on a system. When it is started, it detects the current hardware, and then checks it against a database stored in /etc/sysconfig/hwconf, if one exists. It then determines if any hardware has been added or removed from the system. If so, it gives the users the opportunity to configure any added hardware, and unconfigure any removed hardware. It then updates the database in /etc/sysconfig/hwconf.
If no previous database exists, kudzu attempts to determine what devices have already been configured, by looking at
/etc/modules.conf /etc/sysconfig/network-scripts/ /etc/X11/XF86Config.
Shows short usage message.
Print the help information.
Run 'quietly'; do only configuration that doesn't require user input.
Do only 'safe' probes that won't disturb hardware. Currently, this disables the serial probe, the DDC monitor probe, and the PS/2 probe.
-t, --timeout [seconds]
This sets the timeout for the initial dialog. If no key is pressed before the timeout elapses, kudzu exits, and /etc/sysconfig/hwconf is not updated.
-k, --kernel [version]
When determining whether a module exists, use the specified kernel version. (If this is not set, it defaults to the current kernel version.) Do not specify suffixes such as 'smp' or 'summit'; these are automatically searched.
-b, --bus [bus]
Only probe on the specified bus.
-c, --class [class]
Only probe for the specified class.
-f, --file [file]
Read hardware probe info from file file and do not do an actual probe.
Print probe information to the screen, and do not actually configure or unconfigure any devices.
The topic on Linux - Kudzu detect configure new hardware is posted by - Maha
Hope you have enjoyed, Linux - Kudzu detect configure new hardwareThanks for your time